> » Electrohydraulic Pilot Valve

Electrohydraulic Pilot Valve

 
Electric Discharge Machine (EDM) Electric Discharge Machine (EDM)

Electrical discharge machine works by using the erosion caused by the impulse discharge between the electrode and the conductive material, which has been used in the production of dies....

Amplifier Amplifier

The amplifier is the servo drive for driving and controlling servo valves and proportional valves. It can realize high accuracy control of all kinds of valves. Servo power amplifier can be composed with other hydraulic systems and measuring transducers into an electro-hydraulic servo system, such as...

Electro-hydraulic Servo Valve Electro-hydraulic Servo Valve

Electro hydraulic servo valve can measure the hydraulic oil according to input signal, then to control position, speed, pressure or force in the electro hydraulic systems (generally the pistons and plungers)....

Electro-hydraulic Proportional Valve Electro-hydraulic Proportional Valve

Electro hydraulic proportional valve is a hydraulic component, which can translate electrical signal to displacement signal by an analog electric-machinery converter. When this valve acts, the electric-machinery converter will response the input signal to move the valve core, change the opening size...

Grease Injection Valve Grease Injection Valve

Grease injection valve is an equipment that can output high pressure medium quantitatively. It is the most important part of the quantitative filling machine, which can fill many different kinds of high viscosity oil such as lithium grease, calcium soap grease, other semisolid oil and adhesives. Qua...

Single Axis CNC EDM Machine Single Axis CNC EDM Machine

Single axis CNC EDM machine uses a single axis (Z-axis) with auto-feeding control system (including servo feed system and parameters control system), other axes are manual control axis (X-axis and Y-axis)....

Three Axis CNC EDM Machine Three Axis CNC EDM Machine

With auto-feeding control system (including servo feed system and parameters control system), three axis CNC EDM machine has wonderful performance on automation and control precision. It is widely used in the field of mould production for electronic component, automation, information and communicat...

CNC EDM Blade Grinder CNC EDM Blade Grinder

CNC EDM grinder is a machine that can produce PCD cutters through grinding. With 4 CNC controlled axes and 2 manual axes, which is used for the complete processing of PCD tipped tools....

Electrohydraulic Pilot Valve

  • Offers small to large sized pilot-operated, diaphragm-actuated, automatic control valves for industrial usage.
  • Industrial valves.
  • Design, production and supply of electro-hydraulic controls systems for topside and subsea applications. Stavanger and Houston Based
  • Manufactures conventional and pilot-operated safety pressure relief valves.
  • Manufactures two and four post electro-hydraulic lifts and accessories for car repair workshops as well as a double parking lift.
  • Manufactures industrial valves. For example, knife gate valve, slide gate valve, diverter valve, ram piston valve. Also, strainers.
  • Manufacturer of air, check, pilot, relief control valves.
  • Manufactures single and double seated diaphragm and butterfly valves, actuators and positioners.
  • China based manufacturer of aerosol valves, actuators and dispensers.
  • Manufacturers of diaphragm, angle, globe, pilot, solenoid valves and equipment for pharmaceutical as well as industrial application.
  • Manufacturers of instrument valves, manifolds and their accessories for enclosures, double block and bleed, mounting system and monoflange.
  • Provides pilot operated vent, pressure and vacuum relief, tank gas blanketing valves, flame arresters, regulators and fittings.
  • Manufactures solenoid piloted diaphragm and direct acting valves.
  • Producers of direct operating solenoid valve pilots and systems for non-aggressive fluids and gases.
  • Manufactures pressure regulators, pilot valves, pressure control pilots and other equipment for flow control.
  • High pressure hydraulic products rated from 6000 psi (420 bar) to 20,000 psi (1400 bar), including piston pumps, valves, piston and vane motors, electrohydraulic controls, actuators and power units.
  • Manufactures pilot-operated valves for use in raw-water or high-water-content-fluid (H.W.C.F.), hydraulic and high-pressure water systems.
  • Designs and produces a wide range of spring-loaded and pilot-operated pressure relief and other valves; pumps.
  • Manufactures pilot operated valves for use in raw water or high water content fluids, hydraulic and high-pressure water systems.
  • Manufactures hydraulic and relief valves. Also, sequence, pressure reducing, overcenter, checke, pilot operated check, ball, throttlee, throttle check, solenoid, and accumulator unloading valves.

    • Flow Control Servo Valves

    Proportional Control Valve

    QDY18 Series Servo Valve QDY18 Series Servo Valve

    Our self-developed hydraulic flow control servo valve valve have been widely used in metallurgy, aerospace, shipbuilding, automobile, textile and printing industry. QDY8 series three stage servo valv...

    DLQ6/25 Grease Injection Valve DLQ6/25 Grease Injection Valve

    DLQ6/25 grease filling valve is applied in the grease filling system with small grease injection capacity. The high pressure grease control valve utilizes volume quantitative and pneumatic control, re...

    FN2P CNC EDM Machine FN2P CNC EDM Machine

    FN2P CNC EDM machinery is suitable for machining small-middle size of dies and other parts. The electrical cabinet is integrated with the host, small footprint, which is easy to mount....

    QDY12 Series Servo Valve QDY12 Series Servo Valve

    QDY12 series feedback servo valves have been widely used in metallurgy, aerospace, shipbuilding, automobile, textile and printing industry. It consists of electro-mechanical conversion, power amplifie...

    GW735P CNC EDM Machine GW735P CNC EDM Machine

    GW735P NC EDM machine is suitable for machining small-middle size of dies and other parts. Its host is separated with the electrical cabinet. Machining tool consists mechanical bed, pulse power, contr...

    QDY14 Series Servo Valve QDY14 Series Servo Valve

    Electronic throttling control valve is a key control part of the electro-hydraulic servo control system, acting on electro-hydraulic conversion and power amplification. To be specific, it can receiv...

    SVA-III-S Servo Amplifier SVA-III-S Servo Amplifier

    SVA-III-S is a board type electro hydraulic servo amplifier with position demodulator, which is mainly for controlling 3-stage valve with LVDT position sensor. It has LVDT demodulator circuit, and rea...

    QDY10 Series Servo Valve QDY10 Series Servo Valve

    QDY10 series force feedback servo valves are double nozzle flapper servo valve, which have great performance on fast dynamic response, pressure sensitivity and linearity, small zero drift, low require...

    Product Catalog
    Products